How to Add Games to the R36S

|By RetroKite Team
R36S next to a laptop, microSD card and card reader

Quick answer: To add games to the R36S, shut it down, take the microSD card out of the TF1 slot, and plug it into a computer with a card reader. Open the drive named EASYROMS, copy each game into the folder for its system (for example gba or psx), eject the card, put it back and turn the console on. If you want more room, set up a second card in the TF2 slot instead.

Below are both methods step by step, the folder name for each system, and fixes for the problems people run into most.

In this guide: Before you start · Method 1: one card · Folder names · BIOS files · Method 2: second card · Troubleshooting · FAQ

Before You Start

You'll need: - A computer (Windows, Mac or Linux) - A microSD card reader - Game files you own. We don't supply or link to game or BIOS downloads.

Back up the card first. Copy everything on the EASYROMS drive to a folder on your computer before you change anything. If something goes wrong, you can copy it back.

Check what your card runs. These steps are for cards that show a drive called EASYROMS when you plug them in. That's the layout of ArkOS and its successor, dArkOS, which the standard R36S normally uses. If your card shows a drive called EMUELEC or EEROMS instead, it's a different system with different folder names, and the steps below won't match exactly.

Know the two card slots.

Slot Side What it holds
TF1 Right The system card. It can also hold your games
TF2 Left An optional second card, for games only

Method 1: Add Games to the Card You Already Have

This is the quickest way, and it uses the card that came with your R36S.

  1. Shut down from the menu. Don't pull the card out while the console is on.
  2. Remove the card from TF1 (the right-hand slot) and put it in your card reader.
  3. If Windows asks to format a drive, click Cancel. The card has partitions Windows can't read. Formatting them would wipe the system, and the console would no longer start.
  4. Open the EASYROMS drive. On Windows, if you don't see it, open Disk Management, right-click the EASYROMS partition and choose Change Drive Letter and Paths to give it a letter.
  5. Copy each game into the folder for its system (see the table below). Leave the existing folders and their contents in place: some emulators, such as PSP and Nintendo DS, rely on files that are already there.
  6. Eject the card safely. On a Mac, run dot_clean on the card first to remove the hidden "._" files macOS adds.
  7. Put the card back in TF1 and turn the R36S on.
  8. If the new games don't show up, open the Start menu and look for Update Games Lists. Menu names can differ a little between versions.

Which Folder Each System Uses

Folder names follow the ArkOS layout. Use lowercase file extensions, because the system is case-sensitive.

System Folder on EASYROMS
NES nes
SNES snes
Genesis / Mega Drive megadrive or genesis
Game Boy gb
Game Boy Color gbc
Game Boy Advance gba
PS1 psx (not "ps1")
PSP psp
Nintendo 64 n64
Nintendo DS nds
Dreamcast dreamcast
Arcade arcade
Neo Geo neogeo
PC Engine / TurboGrafx-16 pcengine or turbografx

For PS1 games, the .chd format is a good choice: it keeps each game in a single file and avoids the mismatched .bin and .cue files that often stop games from showing up.

BIOS Files

Most 8-bit and 16-bit systems don't need a BIOS. A few systems do:

  • PS1: one of the BIOS files the ArkOS documentation lists (for example scph1001.bin), placed in the bios folder on EASYROMS.
  • Dreamcast: dc_boot.bin and dc_flash.bin, in a folder named dc inside the bios folder.

BIOS files are copyrighted, so we can't provide them. They should come from a console you own. File names must match exactly.

Method 2: Use a Second Card in the TF2 Slot

A second card keeps your games separate from the system, which makes it easier to back up or replace either card later.

  1. Format the new card as exFAT (recommended, especially for cards over 32GB). FAT32 also works.
  2. Give it a name other than EASYROMS, such as ROMS2. Two cards with the same name can confuse the system at startup.
  3. Insert it in TF2 (the left-hand slot), leave the system card in TF1, and turn the console on.
  4. Open Options → Advanced → Switch to SD2 for Roms. This sets up the folder structure on the new card. Depending on the version, it may not copy your existing games across, so check the new card afterwards and copy over anything that's missing.
  5. Shut down, move the TF2 card to your computer and copy games into its folders, using the same names as the table above.
  6. Put it back in TF2 and turn the console on. Keep both cards in place from now on.

Troubleshooting

Problem What to check
New games don't appear Is each file in the right folder? Restart, then try Update Games Lists
PS1 games are missing A BIOS file is missing, or .bin and .cue files don't match. Try .chd
Windows keeps asking to format Click Cancel every time. Only EASYROMS is meant to be opened
The console won't start after editing the card Files outside EASYROMS may have changed. Copy your backup back, or contact us
The second card isn't used Make sure you ran Switch to SD2 for Roms and both cards are inserted

FAQ

Can I add games to the R36S without a computer?

A computer with a card reader is the simplest way. Some versions of ArkOS also let you copy files from a USB drive using the built-in File Manager.

Which slot is TF1 on the R36S?

TF1 is the right-hand slot and holds the system card. TF2, on the left, is for an optional second games card.

Do I lose the preloaded games if I add my own?

No. Adding files to the folders doesn't remove anything, as long as you don't delete or format the card. If you switch to a second card, the preloaded games stay on the first card; depending on the version, you may need to copy them across yourself.

What format should the second card be?

exFAT is the usual choice, especially for cards over 32GB. FAT32 also works.


Don't have an R36S yet? It comes with 15,000+ games already sorted by system, so there's nothing to set up before you play. See the R36S or browse all retro handheld game consoles.

Related guides: R36S Specs and What It Can Emulate · Real vs Clone R36S · R36 Series Compared

About this guide: RetroKite sells the R36S. We wrote this guide because "how do I add my own games?" is one of the first things new owners ask, and most guides skip the step that causes the most trouble: making sure your card actually shows an EASYROMS drive before you start.

Sources:

  • ArkOS Wiki (Christian Haitian): EASYROMS partition, keeping existing folders, folder names and BIOS files (github.com and github.com)
  • ArkOS Wiki FAQ: second-card setup ("Switch to SD2 for Roms" doesn't copy existing games) (github.com)
  • Handhelds Wiki, R36S File Transfer: TF1 and TF2 slots (handhelds.wiki)
  • Handhelds Wiki, R36S Clones: EMUELEC and EEROMS partitions on clone cards (handhelds.wiki)
  • Tech Tactician, R36S Setup Guide (2026): standard units show EASYROMS; dArkOS as the ArkOS successor (techtactician.com)
  • Retro Handheld Guides, R36S Starter Guide: TF-OS and TF2-GAME slots, second-card setup (retrohandheldguides.com)
  • dArkOS-G80CA-SE Wiki: naming the second card something other than EASYROMS (github.com)
  • 2bluebox, How to Add Games to R36S: card format, lowercase extensions, .chd, dot_clean, Update Games Lists (2bluebox.com)